What this guide solves: The cosmetic tube market splits into two fundamentally different manufacturing technologies — laminate tubes (multi-layer foil barrier, printed flat then formed) and extruded plastic tubes (mono-layer or co-extruded, formed first then decorated). They look similar on a…
What this guide solves: The cap is the last component anyone specs — and the first thing a consumer touches. A mismatched neck finish between cap and bottle causes a 3–5% leakage rate at the fill line. A flimsy flip-top on…
Quick Answer An all-plastic lotion pump is a dispensing pump designed without a metal spring or other metal components. Instead, it uses plastic parts to complete the pumping and locking function. Compared with traditional lotion pumps, all-plastic lotion pumps can…
Quick Answer An up-lock lotion pump locks the actuator in the raised position, while a down-lock lotion pump locks the actuator after it is pressed down. Up-lock pumps are often easier to open and close during repeated use, while down-lock…
Quick Answer To prevent pump bottle leakage during shipping, the pump must be tested as a complete packaging system, including the bottle neck, closure thread, gasket, locking status, dip tube, formula, and outer packaging. A pump that does not leak…
Quick Answer To measure the dip tube length of a pump bottle, use a consistent reference point at the sealing surface or gasket area beneath the closure, then measure to the end of the tube. To determine the correct tube…
Quick Answer A pump for hand sanitizer bottles should be selected according to the final formula, bottle size, dosage requirement, neck fit, dip tube length, gasket sealing, and transportation conditions. For many gel hand sanitizer bottles, a lotion-style dispenser pump…
Quick Answer A pump for body wash bottles is usually a lotion-style dispenser pump designed for daily-use personal care formulas such as body wash and shower gel. The right body wash pump dispenser should match the product viscosity, bottle capacity,…
Quick Answer A pump for conditioner bottles is usually a lotion-style dispenser pump designed to handle creamy or moderately viscous hair care formulas. The right conditioner bottle pump should dispense the formula smoothly, rebound at a practical speed, reach product…
Quick Answer A pump for body lotion bottles is usually a lotion-style dispenser pump designed to release medium- to high-viscosity personal care formulas in controlled amounts. The right body lotion pump depends on the lotion viscosity, desired dosage, bottle capacity,…
Fill out the form below, and we will be in touch shortly.
